Shellab SVAC2E-2 Manual do Utilizador

ECONOMY VACUUM OVEN Models: SVAC1E SVAC1E-2 SVAC2E SVAC2E-2 Previously designated as: 1407, 1407-2, 1408, 1408-2 INSTALLATION

10 OPERATION 7.1 Power Supply: Connect the service cord to a grounded outlet and push the power switch to the ON position. 7.2 Place

11 MAINTENANCE Note: Prior to any maintenance or service on this unit, disconnect the service cord from the power supply. 8.1 Cleaning: Clean the

12 TROUBLESHOOTING AND SERVICE Always make a visual inspection of the oven and control console when troubleshooting. Look for loose or disconnected

13 PARTS LIST DESCRIPTION PART NUMBER Control Knob 4450528 Door Glass SVAC1E (1407) & SVAC1E-2 (1407-2) 3550542 Door Glass SVAC2E (1408) &

14 UNIT SPECIFICATIONS Weight Shipping Net SVAC1E (1407) & SVAC1E-2 (1407-2) 71 lbs. 59.4 lbs. SVAC2E (1408) & SVAC2E-2 (1408-2) 154 108 lbs

15 WIRE DIAGRAM SVAC1E (1407) 115V 50.5 OHMS 270 WATTS50.5 OHMS 270 WATTS13A US CORD1800529HEAT LIGHT4650554THERMOSTAT1750863GREEN LIGHTED SWITCH 1

16 WIRE DIAGRAM SVAC1E-2 (1407-2) 230V 50.5 OHMS 270 WATTS50.5 OHMS 270 WATTS13A EUROPE CORD1800541HEAT LIGHT4650554THERMOSTAT1750863GREEN LIGHTED

17 WIRE DIAGRAM SVAC2E (1408) 115V 50.5 OHMS 270 WATTS50.5 OHMS 270 WATTS50.5 OHMS 270 WATTS50.5 OHMS 270 WATTS13A US CORD1800516HEAT LIGHT465055

18 WIRE DIAGRAM SVAC2E-2 (1408-2) 230V 50.5 OHMS 270 WATTS50.5 OHMS 270 WATTS50.5 OHMS 270 WATTS50.5 OHMS 270 WATTS13A EUROPE CORD1800541HEAT LIG

2 TABLE OF CONTENTS SECTION 1.0 RECEIVING AND INSPECTION SECTION 2.0 GRAPHIC SYMBOLS SECTION 3.0 INSTALLATION SECTION 4.0 CONTROL PANEL OVERVIEW

3 RECEIVING AND INSPECTION IMPORTANT: READ THIS INSTRUCTION MANUAL IMMEDIATELY. Your satisfaction and safety require a complete understanding of thi

4 GRAPHICS SYMBOLS Your oven is provided with a display of graphic symbols to help in identifying the use and function of the availab

5 INSTALLATION Local city, county or other ordinances may govern the use of this equipment. If you have any questions about local requirements, p

6 3.6 Shelves: See Figure One for proper orientation of shelves. DO NOT place items directly on the floor of the chamber. FIGURE ONE

7 CONTROL PANEL OVERVIEW 4.1 POWER: The Main Power I/O (ON/OFF) switch controls all power to the oven. It must be in the I, or ON position before

8 PRECAUTIONS 5.1 Do not place or use explosive, combustible, or flammable materials in the oven. 5.2 Do not use sealed containers in the oven cham

9 VACUUM OPERATION 6.1 A pump with a pumping capacity four times greater than the chamber volume is advisable. The SVAC1E (1407) &